|
WA1303
|
TG WA1303 is the latest generation Wall Plate Access Point which can be installed in any 86mm wall plate without breaking the existing decorations and is easily managed.TG WA1303 is well suited for hotel rooms, school dormitories, and other sites with densely divided rooms.
|
|
Easy to Configure and Deploy
TG WA1303 uses the international standard wall plate design, can installs into any 86mm EU Type wall jack, uplink with PoE input (802.3af), Passthrough port allows native connectivity for existing digital phones.
Dual Fat/Fit mode
TG WA1303 supports Fat and Fit modes, which can flexibly switch between the two according to your network planning, and specify its shipping mode.
Users can start small, acquire the corresponding network equipment and set it to Fat mode. As the number of user grows which tens and hundreds of network devices are installed, the user is recommended to add more TG Box to simplify network management and centrally manage all wall plate series AP. All the users need to do is to switch the APs to Fit mode.
VLAN For multi SSID
TG WA1303 can be configured to broadcast up to 4 SSIDs. Each SSID can be tagged to a specified network VLAN to establish different internet access rights.
Green design
TG WA1303 employs a green design which supports dynamic MIMO power saving (DMPS), enhanced automatic power save delivery (E-APSD), and smart identification of real terminal network requirements. It can dynamically adjust the MIMO working mode and efficiently put terminals to sleep from time to time.
TG WA1303 mode supports single radio standby and allows for more precise control in power saving. |
Specification |
Item |
Description |
Fixed port |
3*10/100M Ports,2*TEL |
Maximum Data Rate |
300Mbps |
Max Rf Transmit Power |
18dBm |
Internal Antennas |
2 * 2dBi |
Operating frequency band |
802.11b/g/n: 2.4 GHz to 2.483 GHz (China) |
Power Consumption |
<5W |
Dimensions |
86mm×86mm×39.7mm |
PoE |
802.3af power supply supported |
Buttons |
1*RESET |
Modulation technology |
11b:CCK,QPSK,BPSK
11g:OFDM
11n:QPSK,BPSK,16-QAM,64-QAM |
Receiver Sensitivity |
270M: -67dBm@10% PER; 130M: -70.2dBm@10% PER;
108M: -68dBm@10% PER; 54M: -72.3dBm@10% PER;
11M: -85.7dBm@8% PER; 9M: -88dBm@10% PER;
1M: -95dBm@8% PER |
Operating/storage temperature |
-10°C~50°C/-35°C~75°C |
Operating humidity |
5%~90%(non-condensing) |
Ingress Protection Rating |
IP31 |
MTBF |
>8000H | |
Software |
Item |
Description |
System Status |
AP Model, AP Name, Up Time, IP&MAC Address, SSID Encryption |
VLANs |
802.1Q, 4094 VLAN IDs (1 to 4094) and SSID-based VLAN assignment |
Blacklist and whitelist |
Static whitelist and blacklist are supported |
Wireless Mode |
11b,11g,11b/g,11b/g/n,11n |
BSSIDs |
4 |
Broadcast Storm Suppression |
Supported |
SSID Hiding |
Supported |
User Isolation |
Supported |
Automatic channel control |
Supported |
Automatic power adjustment |
Supported |
Clients Limit |
Connected user number limitation for every SSID |
Bandwidth restriction |
STA- or SSID-based rate limiting is supported from AP Controller |
Wireless Security |
64/128 WPA-PSK,WPA2-PSK,WPA,WPA2 |
Authentication mode |
Authentication-free, one-key authentication, WeChat authentication, WeChat WiFi authentication, SMS authentication, key authentication, built-in account authentication, radius authentication(China) |
Local Forward |
Supported |
Fat/Fit Mode |
Supported |
Advanced Settings |
Beacon Interval, RTS Threshold, Data Beacon Rate (DTIM),Long/Short Preamble, Short Gi, A-MPDU,A-MSDU,WMM |
management |
Telnet, HTTP, AP Controller |
Access Control |
Connect limitation based on mac address |
Client Association Status |
Supported |
Username Management |
Supported from Web UI or AP Controller |
Firmware Upgrade |
Supported from Web UI or AP Controller |
Backup & Restore |
Supported |
Reset/Reboot Device |
Supported from Web UI or AP Controller |
System Log |
Supported |
Reboot Schedule |
Supported | |
Items |
Product Description |
WA1303 |
Wall Plate Access Point, 802.11b/g/n, 2×2 MIMO | |
|
|
|